Wood Flooring - Oak Cocoa Plank -Vadnais MN
    May 14, 2018 Comments(2)

    Buffing vs Sanding. Is there a difference?

    Are your hardwood floors looking dull and lifeless these days? You have options to restore them! In fact, this versatility is what may have attracted you to hardwood in the first place. Unlike carpet and vinyl that have to be ripped up and tossed away, hardwood can last a lifetime. The difficulty is knowing which method is best: the buff and coat or the sand and finish.

     

    Let’s discuss the differences between buffing and sanding, the results to expect and which method is best.

     

    Buffing. Sanding. Is There a Difference?

     

    The buffing and sanding processes are similar. They both fall under the general umbrella term for “refinishing” and are used for the same purpose: to bring wood floors back to life. The difference is that they address various levels of damage. And, one requires a lot more work than the other!

     

    Compared to buffing, sanding is a more in depth process. It removes the polyurethane sealer, the stain and any damaged wood. If there are deep imperfections, sanding is the way to go. The wood planks also need to be re-stained and re-sealed. The end result is lovely, but it’s a lot of work to go through that may not be necessary.

     

    Buffing may only address the polyurethane layer, but generally, the wood is protected by this layer. Therefore, there is no reason to sand down the wood. With this process, a circular machine removes the top layer, and a new sealer is applied. You may not get a new stain color, but your hardwood floors will look brand new!

     

    Why a Buff and Coat is Worth Every Penny

     

    A buff and coat (or screen and recoat) is what we recommend, providing there is no major damage to the actual hardwood. The best candidates are floors that have minor surface damage or faded, worn finishes.

     

    Buffing is quick, simple and affordable. It can also add life onto your hardwood floors because you don’t need to sand them down and re-stain them. This process is overkill if the wood is not damaged. Done correctly, buffing only removes a small fraction of the finish.

     

    Here are the advantages to having a screen and recoat done:

     

    • Simple process. Buffing hardwood is a relatively simple process that involves abrading the top layer of finish using a pole sander or buffer. A new finish is applied – and voila!

     

    • Little disruption. Once the finish is applied, it takes roughly 24 hours to dry. This means that in one day, you can be enjoying your brand new floors! Less mess and less disruption compared to a complete overhaul.

     

    • Budget friendly. Hardwood is an investment with a huge return. Rather than having to pay for new floors, you can get like-new hardwood for a fraction of the cost. If you opt to do the process yourself, you only need to pay for the materials.

     

    • Better for the wood. Sanding down wood planks ultimately puts more wear on them. If there is no damage to the wood, buffing is best. It extends the life of the planks, giving you the option to re-stain at a later date.

     

    Hardwood flooring is an excellent investment. You can add charm to your home without spending a fortune.

     

    Thank for visiting our blog! Check back for more useful information!

    Disclaimer:

    The information presented on musolfs.com is compiled from reliable sources.

    That said, as a consumer, your main source of information regarding your hardwood floor should be your professional flooring installer.

    Each home and installation project is unique and comes with its own set of considerations.

    We are happy to present general information and tips here and hope that you find this helpful.

    Leave a Reply to Kathy Jantzen Cancel reply

    2 Comments

    • avatar image
      Ashley Fazio Reply

      Who in 15108 does this

      • avatar image
        Kathy Jantzen Reply

        Hello Ashley, Your zip code is out of our service area so I don't have any resources for you. I would recommend searching for a hardwood flooring distributor in your area and then asking them for the names of some of their installer customers. This is the best way to find out since they will have the names of customers who are working in your area. Hope you get what you need! Sorry for the late reply - I was not sure how to get logged in :) Have a great day!